Sanyo VPC-CS1 Manual For Basic Operation

Also see for VPC-CS1 - Full HD 1080 Video: Service manual Owner's manual

Contents

41 EnglishHow to save one frame from a video clip as astill image1 Play back the video clip. Pause the playback at the point you wish to“snap” a photo.2 Press the [ ] button.h The screen to select the aspect ratio of the still image appears. Selectthe desired aspect ratio, and press the [ ] button. Note, however,that if the video clip aspect ratio is 4:3, you cannot select 16:9.HINTThe file size for a video clip is very largei Therefore, be aware that if the video clip is uploaded to a computer to beplayed back, the computer may not be able to play back the video fastenough, making it appear jerky. (The video will always be displayedproperly on the camera monitor or a television.)i Depending on the card, recording may end even before the possiblerecording time indicated.Display the video clip playback pointi During video clip playback, press the MENU button for at least 1 second todisplay a bar showing the current playback point in the video clip.i Press the MENU button for about 1 second to cancel the bar.CAUTIONDuring video clip playback, the sound of a motor is audible...i During recording, the sound of the optical zoom movement or autofocusmovement was recorded. This is not a malfunction.If no audio is heard...i The audio is not played back when the video clip is played back in theframe-by-frame, slow-motion, fast playback or reverse playback mode.