English 1523 Select “PRINTER”, and press theSET button.h The camera changes to thePictBridge mode, and thePictBridge MENU appears.CAUTIONInsert and pull out the cable carefullyi When connecting the cables, make sure that the cable plugs are correctlyoriented and that they match the shapes of the terminal sockets on thedevices. Push the plugs in straight when connecting them. If undue force isused to connect a cable, it may permanently damage the connector pins inthe terminal socket.i Do not use excessive force when connecting and disconnecting cables.Caution when connecting a printeri If the power to the printer is turned off while it is connected, the cameramay not operate correctly. If the camera does not operate correctly,disconnect the USB interface cable, turn off the camera, and thenreconnect the cable.i During PictBridge printing, the camera’s button operation response isslower.i If the camera is powered by the battery pack for printing, make sure thatthe remaining battery charge is sufficient.PRINT 1 IMAGEPrint this imagePictBridge MENU
