Sanyo VPC-HD700 Service Manual

Also see for VPC-HD700BR: Safety manual Instruction manual Instruction manual Instruction manual

Contents

Sanyo VPC-HD700 Service Manual Manual pdf 17 page image

– 17 –3. ELECTRICAL ADJUSTMENT3-1. Table for Servicing ToolsDownload the calibration software and the firmwarefrom the following URL.http://www.digital-sanyo.com/overseas/service/3-2. Equipment1. PC (IBM R -compatible PC, Pentium processor, Window98 or Me or 2000 or XP)2. Digital voltmeter3-3. Adjustment Items and Order1. -6 V (A) Voltage Adjustment2. Lens Adjustment3. AWB Adjustment4. CCD White Point Defect Detect Adjustment5. CCD Black Point And White Point Defect Detect Adjust-ment In Lighted6. Gyro Sensor Zero Offset AdjustmentNote: Item 1-6 adjustments should be carried out in sequence.3-4. Setup1. System requirementsWindows 98 or Me or 2000 or XPIBM R -compatible PC with pentium processorCD-ROM driveUSB port40 MB RAMHard disk drive with at least 15 MB availableVGA or SVGA monitor with at least 256-color display2. Installing USB driverInstall the USB driver with camera or connection kit for PC.3. Pattern box (color viewer)Turn on the switch and wait for 30 minutes for aging to takeplace before using Color Pure. It is used after adjusting thechroma meter (VJ8-0192) adjust color temperature to 3100 ±20 K and luminosity to 900 ± 20 cd/m2. Be careful of handlingthe lump and its circumference are high temperature duringuse and after power off for a while.4. Computer screen during adjustment3-5. Connecting the camera to the computer1. Connect the cable adaptor to the camera.2. Insert the USB cable to the USB terminal of the cable adap-tor.3. Locate a USB port on your computer.4. Insert the AC adaptor’s cable to the DC IN terminal of thecable adaptor.5. Turn on the camera.6. If “USB CONNECTION” is displayed, choose the “COMPUTER”, and press the SET button.Next, choose the “CARD READER”, and press the SETbutton.Ref. No. Name Part codeJ-1J-2J-3VJ8-0190Pattern box (color viewer)Calibration softwareJ-4Number111Chroma meter VJ8-01921Spare lump VJ8-0191J-5J-1 J-3J-4 J-51Discharge jig VJ8-0188J-6 1Collimator VJ8-0260FirmwareDataAWBFocusUV MatrixR BrightRGB OffsetTintB BrightGainPhaseLCDCalibration UploadPAF Cal.LCD Type H AFC TestVCOMDCVCOMPPCal DataCal ModeOKOKEVFUSB storageGetSetVID SetPID SetSerial SetRev. SetSettingLanguageVideo ModeVCOFactory CodeHall Cal.Backrush pulse : SetGetJ-7 1Spare lump (collimator) VJ8-0282