Sanyo VPC-S6U Service Manual

Also see for VPC-S6: User guide

Contents

– 19 –5. CCD Black Point And White Point Defect DetectAdjustment In LightedPreparation:POWER switch: ONSetting of pattern box:Color temperature: 3100 ± 20 (K)Luminance: 900 ± 20 (cd/m2 )Adjusting method:1. Set the camera 0 cm from the pattern box. (Do not enterany light.)2. Double-click on the DscCalDi.exe.3. Select “CCD Black” on the LCD “Test”, and click the “Yes”.4. After the adjustment is completed, the number of defectwill appear.6. LCD Panel Adjustment[CP1 board (Side B)]6-1. LCD VcomPP AdjustmentPreparation:POWER switch: ONAdjusting method:1. Double-click on the DscCalDi.exe.2. Select “0” in the LCD “VCOMPP”.3. Adjust LCD “VCOMPP” so that the amplitude of the CL404waveform is 5.60 V ± 0.1 Vp-p.6-2. LCD VcomDC AdjustmentAdjusting method:1. Adjust LCD “VCOMDC” so that the amplitude of the CL404waveform is 4.40 V ± 0.05 Vp-p.VR501CL501CL404 CL402CameraPattern box(color viewer)CL404 waveform5.60 V± 0.1 Vp-pCL404 waveform4.40 V± 0.05 Vp-pGND(CL402)3-8. Factory Code Setting1. Check the "Factory Code" display within the Setting group.2. For U.S.A., Canada and NTSC general areaIf "FC_SANYO_U" does not appear, click on the " " marklocated on the right of the "Factory Code" display BOX andselect "FC_SANYO_U".3. For Europe and PAL general areaIf "FC_SANYO_EX" does not appear, click on the " " marklocated on the right of the "Factory Code" display BOX andselect "FC_SANYO_EX".