Sanyo VPC-TH1 Service Manual

Also see for VPC-TH1BL: Safety manual Instruction manual Instruction manual Quick guide

Contents

Sanyo VPC-TH1 Service Manual Manual pdf 18 page image

– 18 –3. ELECTRICAL ADJUSTMENT3-1. Table for Servicing ToolsJ-9: Fluorescent tube viewer: HAKUBA light viewer 5700Download the calibration software and the firmwarefrom the following URL.http://www.digital-sanyo.com/overseas/service/Place the DscCalDi.exe file, camapi32.dll file andQrCodeInfo.dll file together into a folder of yourchoice.3-2. Equipment1. AC adaptor2. PC (IBM R -compatible PC, Windows 2000 or XP or Vista)3-3. Adjustment Items and Order1. Optical Axis Adjustment2. Lens Adjustment (Infinity)3. Lens Adjustment (1m)4. AWB Adjustment5. CMOS White Point Defect Detect Adjustment6. CMOS Black Point And White Point Defect Detect Adjust-ment In LightedNote: If the lens, board and changing the part, it is necessaryto adjust again. Item 1-6 adjustments should be carried out insequence.*Adjustment environmentTemperature: 25 ± 10 degrees, Humidity: 55 ± 25 %3-4. Setup1. System requirementsWindows 2000 or XP or VistaIBM R -compatible PC with pentium processorUSB port40 MB RAMHard disk drive with at least 15 MB availableVGA or SVGA monitor with at least 256-color display2. Pattern boxTurn on the switch and wait for 30 minutes for aging to takeplace before using Color Pure. It is used after adjusting thechroma meter (VJ8-0192) adjust color temperature to 3100 ±20 K and luminosity to 900 ± 20 cd/m2. Be careful of handlingthe lump and its circumference are high temperature duringuse and after power off for a while.3. Computer screen during adjustment3-5. Connecting the camera to the computer1. Use the supplied dedicated USB interface cable to connectthe camera to the computer.2. Turn on the camera.3. Choose the “COMPUTER”, and press the SET button.Next, choose the “CARD READER”, and press the SETbutton.Ref. No. Name Part codeJ-1J-2J-3VJ8-0190Pattern boxCalibration softwareJ-4Number111Chroma meter VJ8-01921Spare lump (pattern box) VJ8-0191J-5J-1 J-3J-4 J-51Discharge jig VJ8-0188J-6 1Collimator VJ8-0260J-7 1Spare lump (collimator) VJ8-0282J-8 1Siemens star chartJ-8FirmwareDataAWBFocusUV MatrixR BrightRGB OffsetTintB BrightGainPhaseLCDCalibration UploadPAF Cal.LCD Type H AFC TestVCOMDCVCOMPPCal DataCal ModeOKOKEVFUSB storageGetSetVID SetPID SetSerial SetRev. SetSettingLanguageVideo ModeVCOFactory CodeHall Cal.Backrush pulse : SetGetJ-9 1Fluorescent tube viewer