Sanyo WXU30 - PLC - LCD Projector Owner's Manual

Also see for PLC-WXU30: Owner's manual Brochure Owner's manual Owner's manual Owner's manual

Sanyo WXU30 - PLC - LCD Projector Owner's Manual Manual pdf 25 page image

5 ENGLISHE-mail settingThis projector has an E-mail function which can send an alert messageto users or an administrator if it detects an abnormality on the projectoror run out of the life span of the lamp. Click E-mail Setting on the mainmenu and follow the below steps.E-mail settingItem .................................DescriptionSMTP server* 1........................ Sets server name or IP address of the SMTP serverAdministrator address ....Sets e-mail address of administratorAdd address ........................... Sets e-mail address of the user to send mail when the projector has anabnormality.1 Setting SMTP server and administrator addressSet the server name or IP address of the SMTP server*1 and administrator address. Theadministrator address is set to "Reply-To" address of the message sent from the projec-tor.*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator tohave this SMTP server address.✐ If the projector sends an alert message due to the abnormality on the projector but the SMTPserver is down in some other reason, the message will not be sent. In this case, the message"Unable to connect to server." will be displayed on the setting page. To clear this message, set upSMTP server address again.✐ To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net-work environment.✐ The projector does not send message to the address set in "Administrator address" text box. Ifyou want to send e-mails to the administrator address, enter the administrator address into "Addaddress" text box.