29 EnglishINSTALLING THE BATTERY PACK AND CARDCAUTIONDo not attempt to forcibly remove the cardi Never remove the card when the multi-indicator is flashing red. In doing so,you risk losing the data stored in the card.HINTShooting without a card installedi When a card is installed, images are recorded to and played back from thecard. When no card is installed, images are recorded to and played backfrom the camera’s internal memory. When the camera is turned on with nocard installed, the internal memory icon is shown on the monitor to letyou know that the images you capture will be saved to the camera’sinternal memory.About the temperature alert icon \During camera use, if the temperature of the battery or inside the camera(excluding the battery) rises, a temperature alert icon \ will appear asdescribed below.k When the battery or internal camera (excluding battery) temperaturerises during useh During camera use, if the temperature of the battery or inside thecamera (excluding the battery) rises, a \ icon lights on the monitor. Itis still possible to record and play back even when the \ icon is lit;however it is advised that you discontinue use as soon as possible andturn the camera off.h If the temperature rises further, the \ icon will start to flash, and thecamera will turn off automatically.The camera cannot be turned on until the temperature has dropped (oras long as the \ icon remains flashing). Please wait until thetemperature has dropped before resuming use.h During video recording, a countdown indicator will show the timestarting about 15 seconds before shutdown. When the indicator shows0 seconds, recording stops.h If the camera is turned off while the temperature is high (that is, whilethe \ icon is flashing), it cannot be turned on again until thetemperature has dropped (or as long as the \ icon remains flashing).
