85 EnglishStill image settingFor still images, you can select either the 4:3 or 16:9 horizontal to verticalaspect ratio. This menu is also used for shooting sequential shots.Sequential shots1 Select : or t, and press the SET button.h The camera changes to the sequential shots mode.2 Press the [ ] button.h Shooting begins. Shooting continues as long as the [ ] button iskept pressed.HINTWhat is the maximum number of images in a sequential shotssequence?t: 22 images:: 14 imagesi If you continue shooting even after the maximum number of images hasbeen captured, recording does not stop.i If you continue shooting after the maximum number of images has beencaptured, subsequent captured images will overwrite the sequencealready captured, beginning from the first image in the sequence.About the focus when shooting sequential shotsi When sequential shots are captured, the autofocus operates when the[ ] button is pressed halfway, fixing the focus.Can the flash be used?i The flash does not operate when shooting sequential shots.Did the angle of view change?i When shooting sequential shots, the angle of view relative to that of stillimage shooting may change.About the PHOTO NR (page 122) settingi During sequential shots shooting, the PHOTO NR setting automaticallyturns OFF.
