English xviNOTEk Storing and maintaining your camerai Do not leave the camera unwashed after it has beenimmersed in salt water or if salt water is adhering toit. Doing so may cause corrosion and discoloration ofthe plating, as well as deterioration of the camera’swaterproof capability.i After the camera has been used in water, use freshwater to wash it. Never use soap or detergent toclean the camera, as doing so will cause deteriorationof the camera’s waterproof capability.i After washing the camera, take care to completelydrain it, and use a dry cloth to wipe off any drops ofwater adhering to it (page 67).i Do not leave the camera in an environment colder than0 °C (32°F) or warmer than 40 °C (104°F), as doing somay cause deterioration of the camera’s waterproofcapability.i Waterproof seals are used in this camera. It isrecommended that the waterproof seals be replacedevery year with new ones. For replacing the seals,please consult your dealer.* Please note that there is a fee for replacing thewaterproof seal.k Other cautionsi Do not subject the camera to severe jolts, as doing so may deform thebattery/card compartment cover or camera body, thus compromising itswaterproof capability. If the camera has been subjected to a strong jolt,please consult with your dealer.HINTWhat is “JIS IPX8” (formerly “JIS protection grade 8”)?i “JIS IPX8” specifies that a device is protected against the effects ofcontinuous immersion in water.
