33 EnglishTURNING THE CAMERA ON AND OFFTurning on the camera when the power save(sleep) mode is activeIn order to preserve battery pack power, the power save (sleep) functionwill automatically turn off the camera after 1 minute of no use duringshooting, or 5 minutes of no use during playback (factory-presetsetting).i When the power save mode is active, you can restore the power by any ofthe following methods:h Move the REC/PLAY switch.h Press the ON/OFF button.h Press the [ ] or [ ] button.h Press the SET or MENU button.h Push the zoom switch.h Move the SIMPLE/NORMAL switch.h Press the PHOTO VIEW button.h When the MENU button is used to turn on the camera, the screento set the operation sounds (page 136) appears.i After the power save mode has been active for about 1 hour, the camerawill switch to the standby mode. In this case, you can restore the power bypressing the ON/OFF button, or by closing and then opening the monitorunit.i When the AC adaptor is connected, the power save mode will becomeactive about 5 minutes after the camera is turned on (factory-presetsetting).i The user can specify the time elapsed before the power save mode isactivated (page 151).i When the camera is connected to a computer or printer, the power savemode becomes active after about 12 hours.Turning off the camera1 Press the ON/OFF button for at least 1 second.h The camera turns off.
