Sanyo Xacti VPC-J4EX Instruction Manual

Also see for Xacti VPC-J4: Service manual

Contents

English 801 Menu mode icon (see page 36)Switch the menu mode.2 Resolution menu (see page 59)3 Focus menu (see page 61)4 Self-timer menu (see page 57)5 Mode menu (see page 42)6 Compression menu (see page 83)7 ISO sensitivity menu (see page 84)8 White Balance menu (see page 86)9 Spot focus menu (see page 88)0 Light-measuring mode (EXPMEASURE) menu (see page 89)A Digital Zoom menu (see page 90)B Voice Memo menu (see page 92)C Assist light menu (see page 93)D Exposure correction icon (see page 94)Adjust the image brightness.E Number of remaining images thatcan be captured (see page 136)F HELP display (see page 120)G Remaining battery pack charge(see page 138)Not displayed when the remainingbattery pack charge is near full orwhen the AC adaptor (sold sepa-rately) is used.i When two mutually exclusive settings are made, the later setting has prior-ity, and the related settings are changed accordingly.: 2288 × 1712-pixel (4 millionpixels) resolution icon: 3264 × 2448-pixel (8 millionpixels) resolution icon: 2880 × 2160-pixel (6 millionpixels) resolution icon: 1600 × 1200-pixel (2 millionpixels) resolution icon: 640 × 480-pixel (300,000 pixels) res-olution icon: Shooting with the autofocus: Macro photography (close-ups): Distance photography: Shooting with manual focus: Shoot using the continuous autofocus.: Self-timer off icon: Image captured 2 seconds after shut-ter release button is pressed.: Image captured 10 seconds aftershutter release button is pressed.: Two seconds after the shutter release buttonis pressed, sequential shots are captured.: Ten seconds after the shutter release buttonis pressed, sequential shots are captured.: One still image is captured whenshutter release button is pressed(still image shooting mode): Sequential images are captured whenshutter release button is pressed(sequential shots shooting mode): For shooting at low compression): For shooting at super-low compression: For shooting at normal (moderate)compression: Auto sensitivity setting (ISO50 to 200): ISO50 setting: ISO100 setting: ISO200 setting: ISO400 setting: The camera determines the optimumwhite balance settings based on theambient light and weather.: Fair weather setting: Overcast setting: Fluorescent lighting setting: White (incandescent) light setting: For setting the most accurate whitebalance: Multi-section focus setting: Spot focus on setting: Multi-section light-measuring setting: Center-weighted light-measuring set-ting: Spot light-measuring setting: Digital zoom is enabled.: Digital zoom is disabled.: Voice memo is not recorded: Voice memo is recorded: The assist light setting is disabled.: The assist light setting is enabled.