93 EnglishFILE NO. RESET FUNCTIONIf a reformatted card is used, the file name (image number) of the capturedimage automatically begins from 0001. If the card is subsequentlyreformatted, or if a different reformatted card is used, the file names againbegin from 0001. This is because the file number reset function is set to ON,and consequently it results in more than one card containing images with thesame numbers. By setting the file number reset function to OFF, even if thecard is reformatted or the card is replaced with another card, the consecutivenumbering of file names continues from the last number recorded by thecamera.i If Card B already has image data in it when it replaces Card A, file namesare assigned as follows.h When the highest image number on Card B (before replacing) is lowerthan the highest image number on Card A: the file name of the nextrecorded image continues from last file name recorded on Card A.File name (image number)Card A 0001, 0002...... 0012, 0013Card B 0001, 0002...... 0012, 0013File name (image number)Card A 0001, 0002...... 0012, 0013Card B 00014, 00015...... 0025, 0026Replace cardReplace cardCard A 0001, 0002...... 0012, 0013Card B 0001, 0002, 00014, 00015, 0025, 0026Previously recorded imagesReplace card
