Sanyo Xacti VPC-S7EX Instruction Manual

Also see for Xacti VPC-S7: Service manual

Contents

107 EnglishDIRECT PRINTING2 Select “PictBridge”, and press theSET button.h The screen to select the images toprint appears.CAUTIONCaution when connecting a printeri If the power to the printer is turned off while it is connected, the cameramay not operate correctly. If the camera does not operate correctly,disconnect the USB interface cable, turn off the camera, and thenreconnect the cable.i During PictBridge printing, the camera’s button operation response isslower.i If the camera is powered by batteries for printing, make sure that theremaining battery charge is sufficient.Insert and pull out the cable carefullyi When connecting the cables, make sure that the cable plugs are correctlyoriented and that they match the shapes of the terminal sockets on thedevices. Push the plugs in straight when connecting them. If undue force isused to connect a cable, it may permanently damage the connector pins inthe terminal socket.i Do not use excessive force when connecting and disconnecting cables.:1: 1DATEDATEDATEPRINTPRINTPRINTPrint this image?Print this image?Print this image?