Sanyo plc-xu32 Owner's Manual

Also see for PLC-XU32: Comparison chart Comparison chart Comparison chart Comparison chart Comparison chart

20Press FREEZE button on Remote Control Unit to freeze the pictureon-screen. To cancel FREEZE function, press FREEZE button againor press any other button.PICTURE FREEZE FUNCTIONBASIC OPERATIONADJUSTING SCREENMessage disappears after 4 seconds.Message disappears after 4 seconds.ZoomFocusZOOM ADJUSTMENTFOCUS ADJUSTMENT1 Press ZOOM button on Top Control or ZOOM / button onRemote Control Unit. The message “Zoom” is displayed.2 Press ZOOM button or POINT UP button to make imagelarger, and press ZOOM button or POINT DOWN button tomake image smaller.1 Press FOCUS button on Top Control or FOCUS / button onRemote Control Unit. The message “Focus” is displayed.2 Adjust focus of image by pressing FOCUS / button orPOINT UP/DOWN button(s) .KEYSTONE ADJUSTMENT1 Press KEYSTONE button on Remote Control Unit or selectKeystone on SETTING menu. (Refer to page 35.) Keystonedialog box appears.2 Correct keystone distortion by pressing POINTUP/DOWN/LEFT/RIGHT button(s). Press POINT UP button toreduce the upper part of the image, and press POINT DOWNbutton to reduce the lower part. Press POINT LEFT button toreduce the left part, and press POINT RIGHT button to reducethe right part.Reduce the upper widthwith POINT UP button.Reduce the lower widthwith POINT DOWN button.If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.Reduce the left part withPOINT LEFT button.Reduce the right part withPOINT RIGHT button.• Arrows are white in no correction.• Arrow(s) of direction being corrected turn(s) red.• Arrow(s) disappear(s) at the maximumcorrection.