Sapcon ELIXIR-T-UNI Instruction Manual
Also see for ELIXIR-T-UNI: Instruction manual
          | |
User Manual & Datasheet V 2.17 Electrical SpecificationsPlease refer to Table 1 for Electrical Specifications.PARAMETER VALUEInput Power Supply 18-30 V DCOutput Open Collector - PNP Output (Load capacity upto 90 mA at24 V DC)Switching Indication Red /Green LED ON/OFFSwitching Behavior• ON• OFFFail-safe Feature Field selectable• Fail-safe High ( For Overflow Protection)• Fail-safe Low (For Dry Run Protection)Power Consumption Without Load• 480 mW @ 24 V DC• 168 mW @ 12 V DCWith Load3W @ 24 V DCTable 1: Electrical Specifications8 Application SpecificationsPlease refer to Table 2 for Application Specifications.PARAMETER VALUEResponse Time• Covered• UncoveredValue• 0.5 second• 1 secondRepeatability ± 0.5mmSwitching Hysteresis* 3mm ± 0.5mmFork Resonance Frequency* 1500Hz approx.Minimum Liquid Density 0.7gm/ccMaximum Viscosity of Liquid 10,000 cpSolid Content Diameter < 5mmTemperature• Ambient• ProcessValue• 0◦C to 60◦C• 0◦C to 150◦CTable 2: Application Specifications* The reported values have been found with water as application medium, at room temperature.Sapcon Instruments Pvt.Ltd. R© 6 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine