Sapido Technology Inc. www.sapido.com.tw8410.2 Wireless network connecting- Transfer to Wireless network modeStep 1. Switch to the W mode (Wi-Fi mode) and plug in. WAN/LAN light will turn red to greenwhile starting up. After 30 seconds, both ZigBee lights and Wireless lights will turn on.Step 2. Then press the ZigBee button on both Motion Sensor(MDKA0z) and Door & WindowSensor(DDLA0z) separately once(about 1 sec) to make them connect to the Sensor AlarmRouter(WDG71n).