Sapido RM-1802 User Manual

Sapido RM-1802 User Manual Manual pdf 47 page image

http://www.sapido.com.tw/ User Manual v1.0.047A: The Wireless Router processes the data passing through it, so it is not transparent.Use the Special Application feature to allow the use of Internet applications which donot function correctly. If this does solve the problem, you can use the DMZ function.This should work with almost every application, but: It is a security risk, since the firewall is disabled. Only one (1) PC can use this feature.5. Q: I can’t connect to the Wireless Router to configure it.A: Check the following: The Wireless Router is properly installed, LAN connections are OK, and it ispowered ON. Make sure that your PC and the Wireless Router are on the same networksegment. If your PC is set to “Obtain an IP Address automatically” (DHCP client), restart it. If your PC uses a Fixed (Static) IP address, make sure that it is using an IPAddress within the range 192.168.1.129 to 192.168.1.253 and thus compatiblewith the Wireless Router’s default IP Address of 192.168.1.254. Also, theNetwork Mask should be set to 255.255.255.0 to match the Wireless Router. InWindows, you can check these settings by using Control Panel ~ Network tocheck the Properties for the TCP/IP protocol.6. Q: The WinXP wireless interface couldn’t communicate the WEP with ADSL2/2+Broadband Router’s wireless interface.A: The default WEP of WinXP is Authentication Open System - WEP, but the WEP ofADSL2/2+ Broadband Router is only for Shared Key - WEP, it caused both sidescouldn’t communicate. Please select the WEP of WinXP from Authentication OpenSystem to Pre-shared Key - WEP, and then the WEP wireless interface betweenWinXP and ADSL2/2+ Broadband Router would be communicated.5.7 Support1. Q: What is the maximum number of IP addresses that the XDSL Router willsupport?A: The Router will support to 253 IP addresses with NAT mode.2. Q: Is the Router cross-platform compatible?

/ 49

Related manuals for Sapido RM-1802