Performance Tuning:PermatrimTM Hydrofoil - A marine accessory foryour outboard or sternleg that will improve thehandling and performance characteristics of yourboat:• By eliminating ventilationBy increasing the size of the factorycavitation plate, by up to four times.PermatrimTM reduces the chance for thepropeller to create an air pocket - thecause of cavitation.• Improves rough water handling andstops porpoisingA PermatrimTM enables alot more controlof trim angles and the ability to eliminateporpoising, to plane at a lower speed.• Helps boats get onto the plane fasterBy forcing the water the propeller normally throws out the top, downwards and rearward,PermatrimTM gives more thrust and lift.• Lowers planing speedBy having more lift, a PermatrimTM enables boats to stay on the plane at lower speeds.• Improves fuel economyBecause boats fitted with a PermatrimTM have more lift in the stern, the hull performs moreefficiently when on the plane, as well as being able to plane at lower speeds. More efficiency mustresult in fuel savings.Manufactured from Marine Grade Aluminum. Powder coated for maximum corrosion resistance. Designedand manufactured in New Zealand.Specifications:T240S• Length: 2,40m Width: 1,40m Tube Diameter: 0,42m• Max. Person: 2 Max. Loading: 300kg Design Category: D• Max. Enginepower: 4,42kw Max. Engine Mass: 30kg Length of Shaft: S• Weight of Tubes: 21kg Weight of Transom: 3kg Air Chambers: 2 + 1 (HD-Floor)T260S• Length: 2,60m Width: 1,56m Tube Diameter: 0,48m• Max. Person: 3 Max. Loading: 360kg CE – Design Category: C• Max. Engine Power: 6kw Max. Engine Mass: 60kg Length of Shaft: S• Weight of Tubes: 23,5kg Weight of Transom: 4,5kg Air Chambers: 2 + 1 (HD-Floor)