TALOS ITR-T250 Operating Manual
           | |
TALOS ITR-T2509 www.talospos.comThe function of DIP switch setting as follows：Switch Function (on) (off)1 Cutter No cutter With cutter2 Buzzing prompt Open buzzing prompt Close buzzing prompt3 Printing density High density Regular density4 24 bytes mode No Chinese Character With Chinese Character5 Character per line 42 486 Select cash box Open cash box Close cash box7-8 Transmission rate (apply for serial interface) (refer to below information)Transmission rate (bps) -bytes/s SW-7 SW-838400 ON ON115200 OFF ON9600 ON OFF19200 OFF OFFChapter 2. Printer ManagementSelf-Checking FunctionThe Self-Checking Function allows the user to identify if the printer is operating normally. If theprinter is detected with failure condition, please contact the distributor.Self-Checking Process: Self-checking Procedure：1. Make sure the printer is powered off2. Press FEED button and switch on the power supply while the FEED button still pressed.3. The Self-Checking list should be printing the printer is brought to power. Self-Checking function printers out bytes, part of Chinese character set, command mode, interface type,local printer dial-up switch setting printer setting,…, etc, sequentially. For the printer equip with auto-cutter, the auto-cutter spontaneously cuts the receipt paper immediatelyafter finish printing. The printer automatically goes into data receipt mode after finish self-checking process.Printer MaintenanceMaintaining the printer regularly is a necessary step to sustain the printer quality as the residual paper woolgot collected through the thermal slice.Maintaining the Printer with the following steps:1. Open the paper roll cover and remove the receipt paper roll if necessary.2. Use the alcohol swab to clean the thermal slice printer head3. Slight damp a swab and gentle wipe through the roller and the paper checking sensor4. Reload the paper roll into the printer and closed the paper roll cover. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine