TC-Helicon Voicetone Double User Manual

Contents

TC-Helicon Voicetone Double User Manual Manual pdf 23 page image

24FAQ & Troubleshooting:1. I'm not getting any sound out of Doublea. Confirm the power adapter is properly connectedby checking that a patch number is lit on the NumericDisplay.b. Confirm your microphone is connected properly bytalking through microphone and looking for the InputLight to light green or orange. If the Input Light is goingon, check your connections and settings on your soundsystem. If the Input Light is not on, press the RightFootswitch and turn the effect off, then try varying theInput Knob and see if you can start to hear thedry/unaffected signal through your sound system.Additionally, if you have a condenser microphone,ensure phantom power is enabled.2. I'm not hearing any effect from Double, justmy dry voicea. If you're running in stereo output mode, ensure theEffect On Light is on. If it's off, press the Effect On buttononce to engage it. Additionally, ensure the Mix Knob isnot in the off position (fully left).b. If you're running in mono sound engineer mode,confirm which outputs are connected to your soundsystem. Only the Left Output will produce effects. If it'snot producing any effect sound, ensure the Effect OnLight is on. If it's off, press the Effect On button once toengage it.3. I don't hear any difference when I turn thePitch,Time, μMod or Overdub knobs.a. Ensure the Effect On Light is on. If it's off, press theEffect On button once to engage it.b. Not all patches have all features enabled.Try rotatingthe knob fully left, then fully right - then setting it to avalue.5. My sound is distorted.a. If your sound is only distorted when you have theFAQ & Troubleshooting

/ 25

Related manuals for TC-Helicon Voicetone Double