TCL 40S4800FS Operation Manual

Also see for 40S4800FS: Operation manual

Contents

9DHCP: In DHCP mode, your TV set will get IPaddress, Netmask, Gateway and DNS automatically.Press to OK to start.MAC Address: Press OK to see the MAC addressof your TV set. Then press MENU to return or pressEXIT to exit the menu.- Wireless Network:In wireless menu, press ◄/► to turn wirelessnetwork on or off.Wi-Fi Network OnWIFI NETWORKSMAC AddressMENUWIFI NETWORKS: After Wi-Fi Network is set toOn, press OK to start searching for all availablewireless networks. This may take a few seconds.After the searching is complete, select an accessibleWIFI network to connect. For some WIFI network,you need to input the right password to access.Select Password and press OK, then press ►. Avirtual keyboard appears. Input the password, andthen press OK to connect.WIFI NETWORKSMENUOKHiWiFi 1FAST_WiFiAU_WiFiPUB_WiFiHomeHelloWiFiSmileWiFiDisconnect Refresh View DetailMAC Address: Press OK to see the MAC addressof your TV set. Then press MENU to return or pressEXIT to exit menu.Network ConfigurationAfter you connect your home network to the TV, followthe steps below to configure the network settings of yourTV.Your TV set supports both wired and wireless networkconnection.NetworkWired NetworkWi-Fi NetworkMENUNote: For wired network connection, you need to insertyour Ethernet cable into the Ethernet port first.- Wired Network:Configuration: Press OK to enter, and then press◄/► to select Static or DHCP.Wired NetworkConfigurationMAC AddressMENUStatic: In Static mode, you should input right IPaddress, Netmask, Gateway and DNS to accessnetwork. Press ▲/▼ to select an option, press OKto enter, and then press the numeric buttons to inputnumbers or press ◄/► to select numbers.Netwrok Configuration StaticIP 0.0.0.0Netmask 0.0.0.0Gateway 0.0.0.0DNS 0.0.0.0OKMENUConnections and Setup