TCL 40S6500 Manual
                     | |
113. Turn on the TV and wait for the common interfacefunction to be activated. This may take severalminutes.Note: Do not remove the CAM from the slot.Removing the module will deactivate thedigital services.Accessing Common Interface ServicesAfter inserting and activating the CAM, press on theremote control, select Channel > Common interfaceand press OK/► to enter.This menu option is only available if the CAM is correctlyinserted and activated. On-screen applications andcontent are provided by your digital TV service operator.Note: This feature is only available under DTV source.Using SubtitlesYou can enable subtitles for each TV channel.Subtitles are broadcast via Teletext or DVB-T/DVB-Cdigital broadcasts. With digital broadcasts, you havethe additional option of selecting a preferred subtitlelanguage.Note: Some options are availebale only when Subtitleis set to On.Turning On/Of Subtitles1. Press on the remote control, select Channel >Subtitle and press OK/► to enter.2. Select the Subtitle option, press OK/► to enter,press ▲/▼ to select On or Of and press OK toconirm.3. Press EXIT or to close the menu.Enabling Subtitle Languages on Digital TVChannels1. Press on the remote control, select Channel >Subtitle > Digital subtitle language 1st and pressOK/► to enter.2. Press ▲/▼ to select a subtitle language as yourpreferred language and press OK to conirm.3. Press ▲/▼ to select Digital subtitle language 2ndand press OK/► to enter.4. Press ▲/▼ to select a secondary subtitle languageand press OK to conirm.5. Press EXIT or to close the menu.Shortcut operation: Press SUBT. on the remotecontrol to directly select a subtitle language available forthe selected digital TV program.Installing ChannelsThis section describes how to search and storechannels automatically. This may be done in any of thecases below:- you have skipped the channel installation step in theinitial setup;- you are prompted that there are no channels in TVmode;- you want to update your channels.1. In TV mode, press on the remote control andselect Channel > Channel scan. Press OK/► toenter.2. The TV installs and arranges channels accordingto your country or region. Press ▲/▼ to selectCountry/Region, and press OK/► to enter. Enterthe default password 1234 or your own password incase you have changed the password in the System> Lock menu. Press ▲/▼ to select your country orregion and press OK to confirm.3. Press ▲/▼ to select Automatic search and pressOK/► to enter.4. Press ▲/▼ to select Tuner mode and press ◄/►to select Cable or Antenna.5. Press ▲/▼ to select other options and use ◄/► toconfigure.6. After configuration is completed, press ▼ to selectSearch and press OK to start scanning channels.7. The channel search may take a few minutes. Afterthe automatic search, channels are arranged in apreset order. If you wish to hide or swap channels,press on the remote control, select Channel >Channel organizer and press OK/► to enter.Common Interface(* not available for some models)Encrypted digital TV channels can be decoded with aConditional Access Module (CAM) along with a smartcard provided by a digital TV service operator.The CAM may enable several digital services,depending on the operator and services you choose(for example, pay TV). Contact your digital TV serviceoperator for more information about services and terms.Using the Common Interface FunctionWARNING: Switch of your TV before inserting aCAM. Be sure to follow the instructions describedbelow. Wrong insertion of a CAM may damage boththe module and your TV.1. Following the directions printed on the CAM, gentlyinsert the module into the common interface slot onthe TV.2. Push the module in as far as it will go.Chapter 4 Using More of Your TV |
Related manuals for TCL 32S6500
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine