TCL LCD37VSH Service Manual
                                                                              | |
Contents
| 
37’’ LCD TV Color Monitor TCL LCD37VSH133. Input/Output Specification3.1 Input Signal connectorThis procedure gives you instructions for installing and using the LCD TV display.Lay the display on the desired operation and plug the power cord into a convenient AC outlet. Three-wire power cordmust be shielded and is provided as a safety precaution as it connects the chassis and cabinet to the electricalconduct ground. If the AC outlet in your location does not have provisions for the grounded type plug, the installershould attach the proper adapter to ensure a safe ground potential.Connect the 15-pin D-SUB color display shielded signal cable to your signal system device and lock both screws onthe connector to ensure firm grounding. The connector information is as follow:1611 1551015 - Pin Color Display Signal CablePin No. Description1 Red Video2 Green Video3 Blue Video4 Not used5 GROUND6 Red Video Ground7 Green Video Ground8 Blue Video Ground9 Mandatory +5V Supply for PC Bypass10 Sync. Ground11 Not used12 Serial Data for DDC13 Horizontal Sync.14 Vertical Sync.15 Serial Clock for DDCApply power to the display by turning the power switch to the "ON" position and allow about ten seconds for Panelwarm-up. The Power-On indicator lights "GREEN" when the display is on.With proper signals feed to the display, a pattern or data should appear on the screen, adjust the brightness andcontrast to the most pleasing display, or press auto-adjust to get the best picture-quality.This TV (with PC function) has power saving function following the VESA DPMS. Be sure to connect the signalcable to the PC.If your TV requires service, it must be returned with the power cord. |
Related manuals for TCL LCD37VSH
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine