TCL S6800 Series Operation Manual

Also see for P8M Series: Operation manual

Contents

TCL S6800 Series Operation Manual Manual pdf 9 page image

9Connecting to a Wireless NetworkTo connect to a wireless network1. Ensure you have:• A router broadcasting a high-speed wireless signal• A high-speed internet connection2. Use the Network menu to configure the TV.Network ConnectionYour TV will require an internet connection to operate all functions. Data usage charges may apply.Please refer to your Internet Service Provider (ISP) for additional information.To access the internet, you must subscribe to high speed broadband internet service from your internet serviceprovider.Your TV can be connected to your home network in two ways:• Wired, using the RJ45 (LAN) connector on the back panel.• Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. Theconnection method may be different depending on your actual network configuration. If you have any questions aboutyour home network, please refer to your ISP(Internet Service Provider).Connecting to a wired NetworkTo connect to a wired network:1. Ensure you have:• An Ethernet cable long enough to reach your TV• A router or modem with an available Ethernet port• A high-speed internet connection• An Ethernet (LAN) port on the back of the TV2. Connect your Ethernet cable to the router and to theEthernet port on the back of the TV.3. Use the Network menu to configure the TV.Connections and SetupRouterModem InternetLAN portModem InternetWireless routerNote: Please follow below steps to enter the Network menu.1. Press on the remote control to display the Smart TV homepage.2. Press ▲/◄/► to move the cursor to (Settings) on the right top of the screen and press OK to enter.3. Press ▲/▼ to select Network, then press OK to enter the submenu and follow the on-screen guidance toset up your network.