TDK-Lambda Genesys GEN6-100 User Manual

Contents

TDK-Lambda Genesys GEN6-100 User Manual Manual pdf 69 page image

62CHAPTER 8 ISOLATED ANALOG PROGRAMMING OPTION8.1 INTRODUCTIONIsolated Analog Programming is an internal option card for analog programming of the Genesyspower supply series. The option is factory installed and cannot be obtained with GPIB (IEEE)Interface. Output Voltage and Current Limit can be programmed and readback through opticallyisolated signals which are isolated from all other ground references in the power supply.There are two types of Isolated Analog programming cards:1. 0-5V/0-10V option (PN: IS510): Using 0-5V or 0-10V signals for programming and readback.2. 4-20mA option (PN: IS420): Using current signals for programming and readback.TMNOTE:Use 100Kohm minimum input impedance for the monitoring circuits to minimize the readback error.ProgrammingInputsOutput voltage programming accuracyOutput current programming accuracyOutput voltage programming temperature coefficientOutput current programming temperature coefficientInput impedanceAbsolute maximum voltageMax. voltage between program inputs and supply outputsOutput voltage monitoring accuracyOutput current monitoring accuracyOutput Impedance (see note)Max. voltage between monitoring outputs and supply outputs%%PPM/ CPPM/ COhmVdcVdc%%OhmVdcoo+/-1+/-1+/-100+/-1001M0-15600+/-1.5+/-1.5100600ProgrammingInputsOutput voltage programming accuracyOutput current programming accuracyOutput voltage programming temperature coefficientOutput current programming temperature coefficientInput impedanceAbsolute maximum input currentMax. voltage between program inputs and supply outputsOutput voltage monitoring accuracyOutput current monitoring accuracyMaximum load impedanceMax. voltage between monitoring outputs and supply outputs%%PPM/ CPPM/ COhmmAVdc%%OhmVdcoo+/-1+/-1+/-200+/-200500-30600+/-1.5+/-1.55006008.2.2 4-20mA option (PN: IS420)8.2.1 0-5V/0-10V option (PN: IS510)8.2 SPECIFICATIONSMonitoringOutputsMonitoringOutputs62