TDK-Lambda Genesys Series User Manual

Also see for Genesys Series: User manual User manual Instruction manual Instruction manual Manual

Contents

TDK-Lambda Genesys Series User Manual Manual pdf 26 page image

2.7 INSTRUMENT SELECT COMMANDS2.7.1 SELECT SUPPLYCommands Interface to conduct communications with a designated supply when inMulti Drop Mode.Syntax:INSTrument:NSELect where nn is the address of the select-ed supplyExample:INSTRUMENT:SELECT 17Notes:Upon power up the Master Supply will be automatically selected.:NSELect may be replaced with :SELect2.7.2 READ SELECTED SUPPLY NUMBERSyntax:INSTrument:NSELect?Notes:Returns the selected .Supply number ’xx’2.8 STATUS COMMANDS2.8.1 READ OPERATIONAL CONDITION ‘EVENT’ REGISTER COMMANDReads the Operational Condition Event Register and puts the result in the Output Queue.Syntax:STATus:OPERation[:EVENt]?Alternate Format:STATUS:OPERATION?Example:STATUS:OPERATION:EVENT?Notes:The returned is a decimal number representing the sum of all the event bits.The range of is 0 to 255.2.8.2 READ OPERATIONAL CONDITION ‘CONDITION’ REGISTER COMMANDReads the Operational Condition Register and puts the result in the Output Queue.Syntax:STATus:OPERation:CONDition?Example:STATUS:OPERATION:CONDITION?Notes: