6-16. INSTALLATION PROCEDURE EO1-330156. INSTALLATION PROCEDURE6.1 CONNECTING THE POWER CORD AND CABLES6.1 CONNECTING THE POWER CORD AND CABLESFig. 6-1Fig. 6-2NOTES: Different cables cannot be used at the same time.6.2 HOLDER STAND INSTALLATIONFit the left and right side holders into the dowels of the holder base and fasten the side holders to theholder base with the thumbscrews.Left Side HolderThumbscrewRight Side HolderDowelHolder BaseWARNING!Turn the POWER SWITCH to OFF before connecting the power cord or cables.[B-672] [B-682]Expansion I/OCable4321 1 2341 Power Cord2 Serial Interface Cable (RS-232C)3 Parallel Interface Cable (Centronics)4 Expansion I/O Cable