289.3 LEVEL 3 (Input Level)To enter level 3 , set LCK to ”0000”and then press SET key + Shift( ) key 3 seconds.SetSetSetSetSetSetSetSetSetSetSetSetSetSetInput type selectionAnalog input low limit calibration(Used for mA and V input)Decimal point positionLower Set-Point LimitAlarm mode of AL1Range：-1999 ~ 9999Range：0 ~ 99990000，000.0，00.00，0.000Range:00~19Refer to “Alarm mode type＂Range：0~99 Min 59 Secs0=Flicker Alarm，99:59=ContinuedOthers=On delay time(If ALD=07 , ALT means alarm on time)The same with ALD1SetHysteresis of all Alarm Range：0~1000Range：0 ~ 9999SetAnalog input high limit calibration(Used for mA and V input)(Available for mA and V input)Upper Set-Point LimitScaling Low LimitScaling High LimitRemote input low limit calibration Range：-1999 ~ 9999Remote input high limit calibration Range：0 ~ 9999Alarm time of AL1Alarm mode of AL2Alarm time of AL2Alarm mode of AL3Alarm time of AL3The same with ALT1The same with ALD1The same with ALT1Output 1 low limit calibration(Used for mA and V output)SetRange：0 ~ 9999Output 1 low limit calibration(Used for mA and V output)
