44 Installation TB7100 Installation and Operation Manual© Tait Electronics Limited December 20054.3.2 FCC Compliance 1This device complies with part 15 of the FCC Rules. Operation is subjectto the condition that this device does not cause harmful interference.4.3.3 Unauthorised ModificationsAny modifications you make to this equipment which are not authorised byTait Electronics Ltd. may invalidate your compliance authority’s approval tooperate the equipment.4.3.4 Health, Safety and Electromagnetic Compatibility in EuropeIn the European Community, radio and telecommunications equipment isregulated by Directive 1999/5/EC, also known as the Radio andTelecommunications Terminal Equipment (R&TTE) directive.The requirements of this directive include protection of health and safety ofusers, as well as electromagnetic compatibility.Intended Purpose ofProduct This product is an FM radio transceiver. Its intended purpose is for radiocommunication in Private Mobile Radio (PMR) services or Public AccessMobile Radio (PAMR) services.Important This product can be programmed for frequencies or emis-sions that may make its use illegal. A license must beobtained before this product is used. All license require-ments must be observed. Limitations may apply to transmit-ter power, operating frequency, channel spacing, and emis-sion.Declaration ofConformity Brief Declarations of Conformity appear on page 141. You can downloadthe formal Declaration of Conformity from http://eudocs.taitworld.com/.You can also obtain a signed and dated paper copy of the Declaration ofConformity from Tait Europe Ltd.1. Refer to the specifications manual for more information on the compliance standards to whichthe base station has been tested and approved.
