TM8100/TM8200 Service Manual Description 57© Tait Electronics Limited November 20072.6 Operation in Transmit ModeOverview This section describes the functioning of the transceiver in transmit mode.The operation of the transceiver is illustrated in Figure 2.16 on page 53.These block diagrams show the hardware modules integrated with thesoftware modules:■ hardware (transmitter, receiver, CODEC and audio)■ RISC processor (on FPGA of digital board)■ custom logic (on FPGA of digital board)■ DSP block (on digital board).The transmit path consists of three major functional parts:■ audio processing and signalling■ frequency synthesizer■ RF transmitter.
