Tait TM8105 User Manual
Also see for TM8100 mobiles: Service manualAccessories manualService manualInstallation guideUser guide
                                       | |
Contents
| 
Radio installation 31EnglishInstalling the microphoneA microphone and microphone clip are only used for radioswith a user interface.Connecting the microphoneCaution: The microphone grommet must be installed when-ever the microphone is plugged into the micro-phone socket. When installed, the grommet hastwo functions: to prevent damage to the microphone socket when thereis movement of the microphone cord, and to ensure that the control head is sealed against water,dust and other environmental hazards.To install the microphone:1 Plug the microphone into the microphone socket.2 Slide the microphone grommet along the microphonecord and push two adjacent corners of the grommet intothe microphone socket cavity.3 Squeeze the grommet and push the remaining cornersinto position.4 Check that the grommet is seated correctly in the cavity.Installing the microphone clipCaution: Only install the microphone clip provided. If a non-standard microphone clip is used, the correct oper-ation of the microphone hookswitch cannotbe guaranteed.Install the microphone clip in the most convenient locationfor the radio user. It must be installed: within easy reach of the user, and in such a position that the microphone PTT key cannot beinadvertently activated or jammed on.microphonegrommetcontrol head |
Related manuals for Tait TM8100 mobiles
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine