Tait TMAA02-08 Installation Instructions Manual
   | |
Contents |
TMAA02-08 Keypad Microphone 3© Tait Limited November 2012Radio ProgrammingThe radio does not need to be programmed to recognize the presence of a keypad microphone,as this is automatically done when the radio is powered on. However, there are a few relatedfields that should be configured, as required, to enable the keypad microphone to beused effectively.You must power-cycle the radio after replacing the keypad microphone with a program-ming lead, in order to read or program the radio.Conventional FormsIn conventional mode, there are check boxes labelled “Selcall Call Dialing”, “DTMF CallDialing” and “Phone Patch Call Dialing”. There is also an option “Conventional DialingType” field, where you can program the radio to dial labels or channels from the defaultdisplay.Refer to the online help of the programming application for more information about theseprogramming options.MPT Trunked FormsIn MPT trunked mode, there may be check boxes labelled “DTMF Dialing”, “PABX Calls”and “PSTN Calls”. These check boxes need to be selected before you can make these typesof calls.Refer to the online help of the programming application for more information about theseprogramming options.More InformationRefer to your radio provider for more information about this product. |
Related manuals for Tait TMAA02-08
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine