For your safety 7For your safetyThis radio complies with the IEEE and ICNIRP exposurelimits for occupational/controlled RF exposureenvironments at operating duty factors of up to 50%transmitting (even though the approved batteries forthis radio are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby)).Radio frequency emissions limits inthe USAPart 15 of the FCC Rules imposes RF emission limitson receivers.This radio complies with Part 15 of the FCC Rules.Operation is subject to the condition that this devicedoes not cause harmful interference.Unapproved modifications or changesto radioThe radio is designed to satisfy the applicablecompliance regulations. Do not make modifications orchanges to the radio that are not expressly approved byTait Electronics Limited. Failure to do so could invalidatecompliance requirements and void the user’s authorityto operate the radio.USA public safety bands(764 –776MHz and 794–806MHz)Part 90R of the FCC Title 47 of the Code of FederalRegulations (CFR) deals with the use of frequencies inthe 764 to 776MHz and 794 to 806MHz bands.Low-power channelsThis radio complies with §90.531 (b) (3) and§90.531 (b) (4) of 47 CFR. These sections state that onlylow-power transmission is permitted on thefollowing channels:! Regional Planning channels, as defined in§90.531 (b) (3).
