2 0 W W W.T A L K S W I T C H . CO MT S - 2 0 0 U S E R G U I D ECONFIGURATION MENUS FUNCTION SUMMARYKey Code Feature/Value Name Explanation1 Phone book Program entries in the phone book2 Speed dial Program speed dial buttons3 Headset Enable/disable headset mode4 Voicemail # Program voicemail/messages dial string5 Ring tone Ring tone control6 LCD contrast Change the LCD contrast7 LCD backlight Time in seconds for LCD backlighting to stay on8 Features Accesses the features menu9 Auto dial prefix Access code to be dialed to access outside line0 Set time/date Set the TS-200 time and date* Advanced cfg. Accesses the advanced configuration menu# About Displays the TS-200 firmware version8-1 Time format Sets the display format for time8-2 Date format Sets the display format for date8-3 Auto time set Synchronize the time and date using incoming Caller ID8-4 Auto answer Automatically answer incoming calls8-5 Store Caller ID Enable/disable call log8-6 Quiet auto-dial Enable/disable speaker when dialing stored phone numbers8-7 Format numbers Format numbers with dashes. ie: 1-613-725-29808-8 Auto idle/hold Phone returns to idle after hold is pressed*-1 System features Accesses system features menu*-2 Softkeys Reprograms softkey labels and codes*-3 Flash time Duration of the line interruption when Flash is pressed*-4 Pause time Duration of pause when inserted in dial strings*-5 Auto dial time DTMF digit duration for stored/pre-dialed phone numbers*-6 Auto dial gap Length of inter-digit pause for stored/pre-dialed phone numbers*-7 Release time Duration of on-hook when call released - 0= remain idle*-8 Key time out Data entry key time-out*-9 LCD test Lights all LCD segments for test*-0 Download NOT USED*-*- Factory reset Resets the programming to factory defaults*-1-1 PBX direct line Disables dialing of the line access code (auto-dial prefix)*-1-2 PBX hold Flash for hold or local hold*-1-3 PBX FSK Receive TalkSwitch FSK commands*-1-4 PBX download Enable direct Firmware download from TalkSwitch*-1-5 Hold release Return the phone to idle when a call is put on hold*-1-6 Disconnect clear Return to idle when a line disconnect is detected*-1-7 Light w/off-hook Turn message light ON when off-hook*-1-8 Extended DTMF Enables extended DTMF (A-D) dialing