TallyGenicom 7265 Operator's Manual

Also see for 7265+: Product guide Specifications

Paper handling This section describes how to set the paper type, load fanfold paper and single sheets, trans-port paper and move the paper to the tear position.ä Changing thepaper typeYou can change the paper type either from an application program, by means of the paperpath quick selection feature or in the Setup menu. In this section, the quick selection featureis described; for detailed information on how to make this setting via the Setup menu, referto the Reference Manual on the Online CD-ROM.On some printer models, the single sheet paper source cannot be selected since these modelsare not designed for manual single sheet feeding.Make sure that the printer is in offline mode; press the Online key, if necess-ary.Press the Park (1) key. If fanfold paper is loaded in the printer, it is fed to thetear position. The text tear paper off appears in the display. Then press anykey. If a single sheet is loaded in the printer, it is ejected.Use one of the marked keys to select the desired paper path, for example,Single (2).The printer returns to offline mode. The display alternates between the basicmenu and the menu in the following figure:Insert a single sheet (for the procedure, see page 17, Loading single sheets).Press the Online key to set the printer to ready status. When the printer re-ceives data from the computer, the single sheet is automatically loaded. Pressthe Load (4) key to load the single sheet before starting the printout.Offline Tractor1Park Load OnlineSetup21 3 4Single TractorOnlineSetup21 3 4 If you do not make a selection within 5 seconds, the menu is closed.Load paper fromSingle OnlineSetup21 3 4Online SingleLoad OnlineSetup21 3 4Paper handling Quick start-up14