Indicator Messages48Indicator MessagesThe control panel indicators (Ready, Error) provide information about yourprinter and help you locate each problem.Error MessagesThese messages indicate errors which you must correct before a print jobcan continue or the printer status returned to “Ready”.Readyindicator(green)Errorindicator(orange)Condition ActionBlinking Blinking Communication Error. Check the printercable.Video Under-run Turn off the printer.After a few seconds,turn on the printer.Change to a lowerresolution.Rapid blinking alter-natelyNo media in the trayspecified in the printerdriver.Load the appropriatetype of media intoTray 1.Media size errorIf the “Auto Continue”option has been acti-vated in the Status Dis-play, the sheet alreadyfed in, is automaticallyejected after a predeter-mined time.Load the appropriatesize media into Tray 1.Waiting for the ManualDuplex.Load the second sideof the media. (Refer tothe “Manual Duplex-ing” on page 31.)Waiting for a proof print Press the Cancel but-ton if the proof print isacceptable. If it is notacceptable, hold downthe Cancel button formore than 5 secondsto cancel the currentjob.
