Tanaka TBC-250 Owner's Manual

Also see for TBC-250: Shop Manual Owner's manual Owner's manual

Contents

Tanaka TBC-250 Owner's Manual Manual pdf 16 page image

www.tanaka-usa.com 15 custsvc@tanaka-ism.comOwner’s ManualTBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFDTBC-270PN/PND,TBC-300/SDH/3010,TBC-340/DTBC-340PF/DMaintenance scheduleBelow you will find some general maintenance instructions.For further information please contact your service dealer.Daily maintenance• Clean the exterior of the unit.• Check that the harness is undamaged.• Check the blade guard for damage or cracks. Change the guard in case of impacts or cracks.• Make sure the cutting attachment is properly centered, sharp, and without cracks. An off-centeredcutting attachment induces heavy vibrations that may damage the unit.• Make sure the cutting attachment nut is sufficiently tightened.• Make sure the blade transport guard is undamaged and that it can be securely fastened.• Check that nuts and screws are sufficiently tightened.Weekly maintenance• Check the starter• Clean the exterior of the spark plug.• Remove it and check the electrode gap. Adjust it to 0.6 mm, or change the spark plug.• Clean the cooling fins on the cylinder and make sure the air intake at the starter is not clogged.• Make sure the gear case is filled with grease up to ¾ full.• Clean the air filter.Monthly maintenance• Rinse the fuel tank with gasoline.• Clean the exterior of the carburetor and the space around it.• Clean the fan and the space around it.