Tanaka TCS 33EB Safety Instructions And Instruction Manual

Also see for TCS 33EB: Handling instructions Handling instructions Handling instructions

Contents

Tanaka TCS 33EB Safety Instructions And Instruction Manual Manual pdf 5 page image

English5WARNINGS AND SAFETYINSTRUCTIONSPay special attention to statements preceded by thefollowing words:WARNINGIndicates a strong possibility of severe personalinjury or loss of life, if instructions are not followed.CAUTIONIndicates a possibility of personal injury or equipmentdamage, if instructions are not followed.NOTEHelpful information for correct function and use.Operator safety○ Always wear a safety face shield or goggles.○ Gloves should be used when sharpening chain.○ Always wear safety protective equipment such asjacket, trousers, gloves, helmet, boots with steeltoe-caps and non-slip soles, and eye, ear and legprotection equipment whenever you use a chainsaw. For working in trees the safety boots mustbe suitable for climbing techniques. Do not wearloose clothing, jewelry, short pants, sandals or gobarefoot.Secure hair so it is above shoulder length.○ Do not operate this tool when you are tired, ill orunder the influence of alcohol, drugs or medication.○ Never let a child or inexperienced person operatethe machine.○ Wear hearing protection. Pay attention to yoursurroundings.Be aware of any bystanders who may be signalinga problem.Remove safety equipment immediately uponshutting off engine.○ Wear head protection.○ Never start or run the engine inside a closed roomor building.Breathing exhaust fumes can kill.○ For respiratory protection, wear a protection maskwhile emitting the chain oil mist and dust fromsawdust.○ Keep handles free of oil and fuel.○ Keep hands away from cutting equipment.○ Do not grab or hold the unit by the cutting equipment.○ When the unit turned off, make sure the cuttingattachment has stopped before the unit is set down.○ When operation is prolonged, take a break from timeto time so that you may avoid possible Hand-ArmVibration Syndrome (HAVS) which is caused byvibration.○ The operator must obey the local regulations ofcutting area.WARNING○ Antivibration systems do not guarantee that you willnot sustain Hand-Arm Vibration Syndrome or carpaltunnel syndrome.Therefore, continual end regular users shouldmonitor closely the condition of their hands andfingers. If any of the above symptoms appear, seekmedical advice immediately.○ Long or continuous exposure to high noise levelsmay cause permanent hearing impairment. Alwayswear approved hearing protection when operatinga unit/machine.○ If you are using any medical electric/electronicdevices such as a pacemaker, consult yourphysician as well as the device manufacturer priorto operating any power equipment.Unit/machine safety○ Inspect the entire unit/machine before each use.Replace damaged parts. Check for fuel leaks andmake sure all fasteners are in place and securelytightened.○ Replace parts that are cracked, chipped or damagedin any way before using the unit/machine.○ Make sure the side case is properly attached.○ Keep others away when making carburetoradjustments.○ Use only accessories as recommended for this unit/machine by the manufacturer.○ Never let the chain strike any obstacle. If the chainmakes contact, the machine should be stopped andchecked carefully.○ Make sure the automatic oiler is working. Keep theoil tank filled with clean oil. Never let chain run dryon the bar.WARNING○ Never modify the unit/machine in any way. Do notuse your unit/machine for any job except that forwhich it is intended.○ Never use chain saw without any safety equipmentor that has faulty safety equipment. It could result inserious personal injury.○ Using guide bar/chain other than recommended bythe manufacturer which are not approved, couldresult in a high risk of personal accidents or injury.Fuel safety○ Mix and pour fuel outdoors and where there are nosparks or flames.○ Use a container approved for fuel.