5Basic ProceduresNOTE:- To make sure that the USB driver is properly installed, please follow the correctprocedure as outlined here.USB Communication for Windows 7 / Vista / 2000RTR-57UInstalling the provided software see P.9 -11Please follow the directions to install [T&D Recorder for Windows] .Connecting the Data Collector to the Computer see P.19Enable communication by connecting the Data Collector to the computer with a USBcable. Once the USB cable is connected, the USB driver will automatically be installed.Setting Up the COM Port see P.31Registering a Remote Unit see P.33In order to communicate via Wireless Communication, it is first necessary to register thedata logger as a Remote Unit to an RTR-57U.Making Recording Start Settingssee [Basic Functions] for each type of deviceNOTE:- Before making [Record Start] Settings make sure that your computer clock settingsare correct. If your computers clock is not correct, it will effect the date and time ofthe recording start.Downloading Recorded Datasee [Basic Functions] for each type of deviceBefore downloading it is possible to make settings in the [Detailed Settings] to specify thewhat kind of processing should be done with the data after downloading, i.e. open a Graphor assign a file name and save.NOTE:- Before making Downloading Data make sure that your computer clock settings arecorrect. If your computer s clock is not correct, it will effect the date and time of thedata being downloaded.
