T&D RTR-602 User Manual

Also see for RTR-600 Series: User manual Setup guide

T&D RTR-602 User Manual Manual pdf 1 page image

Safety Precautions and InstructionsTo ensure safety obey all of the following warnings.The following items should be strictly obeyed for the safe usage of this product, and for protecting yourself and other people from bodily harm and/or damage to property. Before using this product, please read the following carefully and fully understand the contents.DANGER Failure to follow the instructions with this symbol could cause serious injury or even death.DO NOT USE THIS PRODUCT IN WAYS OTHER THAN ITS IN-TENDED PURPOSEThis product has been designed to measure thetemperature of food and liquids. Do not use it for anypurpose other than for which it was designed.Because the sensor has a sharp tip, there is a risk ofaccidentally stabbing people and/or objects. Do notuse the sensor for any purpose other than measuringthe temperature of objects for which it was designed.PLACE AND STORE IN A SAFE PLACEAvoid placing the unit in unstable areasexposed to vibration, slippery surfaces,or within reach of small children. Whennot in use, put a cover on the sensortip and store in a safe place.CLEAN and STERILIZE UNITS BEFOREAND AFTER USEBefore and afterusing, please cleanto remove anysubstances attachedto the surface andsterilize the units inorder to prevent thegrowth of bacteria.If a unit gets dirty or oily, wipe it with aclean cloth dipped in alcohol.NEVER use an acid, alkaline, or chlorine baseddetergent. This will cause harm to the electriccomponents in the unit or the battery charger.DO NOT TOUCH SENSOR IMME-DIATELY AFTER MEASUREMENTPlease be careful when using inextreme hot or cold environments;touching the unit may cause burnsor frostbite.CAUTION Failure to follow the instructions with this symbol couldcause personal injury or physical damage to equipment.- Do not disassemble, repair or modify the unit and/or accessories.- Do not forcibly insert the sensor into hard objects such as frozen food.It may cause to sensor breakage, leading to unexpected accidentsand injury.- Do not cut or process the sensor cables. Also, do not twist, pull orswing any of the cables.- We are not responsible for any damage, malfunction or trouble,whether direct or indirect, caused by the use of our product.- To prevent damage to the unit from static electricity, remove staticelectricity from your body before touching the unit.Important Notices and DisclaimersIn order to properly use this product, please carefully read this documentbefore using.- All rights of the attached documents belong to T&D Corporation. Itis prohibited to use, duplicate and/or arrange a part or whole of theattached documents without the permission of T&D Corporation.- All registered trademarks, company names, product names and logosmentioned herein are the property of T&D Corporation or of theirrespective owners.- Specifications, design and other contents outlined in this documentare subject to change without notice.- Please follow the safety precautions outlined in this documentcarefully.- We cannot guarantee nor are we responsible for safety if this productis used in any manner other than was intended.- On-screen messages in this document may vary slightly from theactual messages.- Please notify the shop where you purchased this product or T&DCorporation of any mistakes, errors or unclear explanations in thisdocument.- T&D Corporation accepts no responsibility for any damage or loss ofincome caused by the use of our product.- Please read the warranty and provisions for free repair carefully.Information Regarding Product Disposal- This product contains recyclable Ni-MH batteries.- If you wish to dispose of the unit, please contact your local distributor.Compliance InformationThis device complies with Part 15 of the FCC rules and RSS-210of Industry of Canada. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and(2) This device must accept any interference received, includinginterference that may cause undesired operation.Ce dispositif est conforme à la norme RSS 210 d’Industrie Canada.L’utilisation de ce dispositif est autorisée seulement aux conditionssuivantes : (1) il ne doit pas produire de brouillage et (2) l’utilisateurdu dispositif doit être prêt à accepter tout brouillage radioélectriquereçu, même si ce brouillage est susceptible de compromettre lefonctionnement du dispositif.This equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by theparty responsible for compliance could void the user’s authority tooperate the equipment.This transmitter must not be co-located or operating in conjunctionwith any other antenna or transmitter.Part Names and FunctionsLED (Orange) By pressing the button, the lamp will turn on when a temperaturemeasurement is recorded.Judgement LED(Red / Green)The judgement result of temperature measurement will be shown. Out ofRange: Red LED will blink. Within Range: Green LED will blink. Button When this button is pressed, the Temperature, Date / Time, User Name,Item, and Judgement Result at the time of pressing are recorded into theRTR-602.Operation Buttons Press to enter the settings menu or confirm a setting. By pressing this button, the menu will be displayed. Also, press to returnto the previous screen.Press to move the arrow cursor up and down or scroll the screen.Power Button Press to turn the power ON or OFF. The automatic power-off function auto-matically turns off the power after about five minutes of inactivity.Optical Commu-nication AreaDo not shield the communication area with a tape as it may causecommunication errors.Sensor Tip ShapeEach sensor type has a different tip shape: the long type sensor has a roundtip; and the short type sensor has a sharp tip (for piercing target object).Sensor Materials: Stainless Steel (SUS316)Handgrip Materials: Flame-retardant PPE/PA6 (Temperature Durability: About 170°C)Cable Materials: Fluoropolymer Coated Electrical Wire Cable Length: 900 mmtandd.com© Copyright T&D Corporation. All rights reserved.2021. 02 16504390053 5th EditionThank you for purchasing our product.Carefully read this instruction manual before using this unit.RTR-602 SpecificationsMeasurement Channels Temperature 1chSensor Platinum Resistance (Pt1000)Measurement Units °C , °FMeasurement Range -60 to 250°CAccuracy ±0.5°C at -10 to 150°C±1.0°C at -60 to -10°C, 150 to 250°CMeasurement Resolution 0.1°CResponsivenessThermal Time Constant:Approx. 12 sec. (in air) / Approx. 2 sec. (in agitated water)Response Time (90%):Approx. 60 sec. (in air) / Approx. 3 sec. (in agitated water)Measurement/ Display Interval 0.5 sec.Recording Items Temperature, Measurement Time, User, Item, Judgement ResultLogging Capacity 1,800 readingsRecording Mode Endless (Overwrite oldest data when capacity is full)CommunicationInterfacesShort Range Wireless CommunicationFrequency Range: 902 to 928MHzRF Power: 7mWTransmission Range: About 50 meters (if unobstructed and direct)Optical CommunicationWireless Transmission Range Approx. 50 metersCommunication Time Data Download Time (for 1,800 readings): Approx. 2 minutesAn additional 30 seconds should be added for each Repeater. (*1)Power Two included AAA Ni-MH batteries (Non-Contact Charging System) (*2)Battery Life Approx. 24 hours (for Continuous Operation with Backlight Always ON)DimensionsH 181.3 mm × W 53.5 mm × D 53.5 mm (excluding sensor)Sensor Length: Short type 135 mm, Long type 310 mmCable Length: 900 mmWeightRTR-602S (Short Sensor) Approx. 200 gRTR-602L (Long Sensor) Approx. 210 gRTR-602ES (Cable Type Short Sensor) Approx. 250 gRTR-602EL (Cable Type Long Sensor) Approx. 260 gOperating Environment -10 to 60°CWaterproof Capacity IP68: SubmersibleSoftware (*3) Base Unit/Repeater Settings: RTR500BW for WindowsRemote Unit Settings: RTR-600 Settings UtilityCompatible Base Units /RepeatersBase Units: RTR500BW / 500BC (*4), RTR-500NW / 500AW / 500 (*4)Repeaters: RTR500BC, RTR -500*1: When using RTR500BW as Base Unit and RTR500BC as Repeater. Depending upon conditionsit may take up to an additional 2 minutes.*2: A Battery Charge Dock (RTR-600BD) needs to be purchased separately.*3: Software can be downloaded free of charge from T&D Website.*4: Customers wishing to use the RTR500BC or RTR-500 as a Base Unit, please contact yourlocal distributor for the communications protocol specifications to write your own software.The specifications listed above are subject to change without notice.RTR-602S RTR-602L RTR-602ES RTR-602ELCommon Accessories: Manual Set (Warranty Included)Before Using this Product• The RTR-602 Units function as Remote Units. They require Base Units to carry out wireless communication. Before getting ready and setting upthe Remote Unit, make sure to first get ready and setup the Base Unit(s).• To use RTR-602, it is necessary to make operation settings via the software ”RTR-600 Settings Utility”.For details about the operation settings via the software, refer to the ”RTR500BW+RTR-600 Setup Guide (PDF)”. Both the software and manualcan be downloaded from the T&D Website.• To carry out setup of RTR-602, a Battery Charge Dock with USB communication function “RTR-600BD” (sold separately) is also necessary.Wireless Food Core Temperature Data LoggerRTR-600 SeriesRTR-602 Users ManualIn this manual, RTR-602S, RTR-602L, RTR-602ES, and RTR-602EL are referred to as “RTR-602”,“Remote Unit(s)”, or simply as “device(s)”.

/ 2

Related manuals for T&D RTR-600 Series