Notes about Operation40Before UsingConnecting the AC AdaptorWhen ready for actual operation, disconnect the USB cable from theBase Unit and supply power by connecting to the supplied AC adaptor.When using RTR-500NW,please connect the LAN cableto the HUB before supplyingpower.About the supplied AC adaptor (AD-0638)Input: AC100-240VOutput: DC6V 500mAFrequency: 50/60HzCable length: 1.85m (74in)Plug Figuration: ALED Lamps before Starting OperationAt this point if the Unit is properly running, after having supplied powerall the LED lamps should come on and after a short time the POWERand ACTIVE LED lamps should remain on.- For details about the other LED lamps see page 42 of this Manual.
