1. Tank Cover2. Nozzles3. LED Display4. Power Cable5. Power Button6. Sleep Button7. Humidity Button8. Mist Button9. Timer Button10. Warm Mist Button11. Tank Handle12. Water Tank13. Mist Tube14. Atomizer15. Air Outlet16. FloaterOPERATIONS AND FUNCTIONS1 2 3 4Add Water1-2. Remove the tank cover, take out the water tank by holding the tank handle.3. Fill the tank with clean water.4-5. Place the tank back into the base, cap on the cover. Please make sure it fits together securely sothat water can go from the tank to the reservoir.6. Connect to an appropriate power source. The unit enters standby mode with a beep sound, theLED display shows the relative humidity of current environment.51 2 3 41. If tap water is too hard, it is recommended to use filtered or distilled water to avoid whitedust. DO NOT use hot water.2. DO NOT add any essential oils or medicinal tablets into the water tank.3. DO NOT add water into the base or through nozzle.4. DO NOT move the humidifier while the water tank is full of water to avoid leakage or baseoverfilling.5. You can fill the water tank without removing it from the base, pay attention to avoid watergetting into the air outlet.PRODUCT DIAGRAM0807123456 789101112131416155