Targus BLUETOOTH MEDIA REMOTE User Manual

Contents

Targus BLUETOOTH MEDIA REMOTE User Manual Manual pdf 3 page image

Targus Bluetooth Media Remote for iPad Targus Bluetooth Media Remote for iPad4 4Targus Bluetooth Media Remote for iPad Targus Bluetooth Media Remote for iPad5 5Installing the Batteries1 Remove the battery cover located on the bottom of theremote.2 Insert the supplied battery, making sure that the positive (+)and negative (-) end matches the polarity indicators insidethe battery compartment.0 6789123450 678912345Establishing the Connection1. Turn on the remote by sliding the power button to the ONposition.2. Switch ON the Bluetooth function of your iPad.3. Press the Connect button inside the battery compartmentof your Targus Bluetooth Media Remote to enable discoverymode. The low power indicator light will flash blue when theremote is in discovery mode.4. Once the remote is listed as a found device in the bluetoothmenu on the iPad, tap on the name and you will be prompted toenter a pass key as shown.0 6789123455. Use the number buttons in the battery compartment of yourremote to enter the passkey shown on the pop up message,followed by the enter key.6. Bluetooth Media Remote for iPad is now connected with youriPad and the blue light on the front of the remote will stop flashing.“Bluetooth Media Remote” wouldlike to pair with your iPad.Enter the passkey “XXXXXX”on “Bluetooth Media Remote”,followed by the return or enter Key.Cancel0 678912345EnterConnect