Tascam 12 Manual

Also see for 12: Owner's manual Owner's manual Manual Owner's manual addendum

Making various DAW application settingsPro ToolsThe following screens are from Pro Tools12 Ultimate version2019.12.1. Click “Setup” > “Peripherals…”2. Select the “MIDI Controllers” tab, and set the Type to “HUI”.3. Set Receive From to “MIDIIN2 (Model 12 MIDI)”.On a Mac, set it to “Model 12 MIDI DAW Control IN”.4. Set Send To to “MIDIOUT2 (Model 12 MIDI)”.On a Mac, set it to “Model 12 DAW Control OUT”.5. Click “OK”.The 8 button on the Model 12 will light, showing thatremote control is enabled.Controls that can be used with the DAWThe following Model 12 controls can be used to operate theDAW application.o F2 button (DAW CONTROLLER MARKER screen)o F2 button (DAW CONTROLLER TRACK screen)o F3 button (DAW CONTROLLER TRACK screen)o F4 button (DAW CONTROLLER TRACK screen)o MULTI JOG dial (locate function)o m/, buttonso 8 buttono 7/9 buttono 0 buttono PAN knobs (1-6, 7/8-9/10)o REC buttons (1-6, 7/8-9/10)o MUTE switches (1-6, 7/8-9/10)o SOLO switches (1-6, 7/8-9/10)o Channel faders (1-6, 7/8-9/10)ATTENTIONImmediately after connecting with the DAW as well as aftersettings have been made in the DAW, the DAW settings andthe state and positions of the Model 12 buttons, knobs andfaders will not match. In this case, adjust the DAW settings tomatch the Model 12 settings, or use the Model 12 buttons,knobs and faders to match the DAW settings.TASCAM Model 12 DAW Controlmode Manual 9