Tascam CD-200BT Owner's Manual

28 TASCAM CD-200BT7 – TroubleshootingIf you have problems with your system, look through thischart and see if you can solve the problem yourself beforecalling the nearest retailer or TASCAM representative.8 No powere Is the unit’s power plug completely inserted into a workingpower outlet?8 Remote control doesn’t work.e Check to see if the batteries are properly installed in theremote control.e If the batteries are dead, change the batteries.8 No sounde Check the connection to the monitor system again.e Check the volume and settings of the amplifier.8 There is unwanted noise.e Are the connecting cables all properly connected andfunctioning?8 A CD cannot be played back.e If you are using a data CD with MP3 files, confirm that the filebit-rates are compatible with this unit.e Is the disc scratched or dirty?8 I cannot play back all the files on a data CD.e Make sure the unit is not in folder playback mode.8 I cannot use program playback.e Make sure the playback area is not set to ALL PLAY.To use program playback with data CDs, the playback areamust be set to FOLDER.8 The audio skips or there is noise.e Is there a wireless LAN, another Bluetooth device, amicrowave oven or a similar device nearby? Use this unit asfar as possible from such devices.e Reduce the distance between the Bluetooth device and thisunit when using them together. Try changing the positionsof the Bluetooth device and this unit.e If you are using any applications on a smart phone otherthan one for audio playback, the sound might skip. If thisoccurs, stop the operation of applications other then the onefor audio playback.8 The unit cannot connect to the device ortransmission between them is disrupted.e Confirm that the Bluetooth device’s power is on and that itsBluetooth function is also on.e Is the Bluetooth device too far from the unit? Is a wall orother obstacle interfering with transmission?If the Bluetooth device is behind this unit, the unit itselfcould be blocking transmission.Change the positions of the Bluetooth device and this unit.e Try turning this unit off and than on again.e Delete the “CD-200BT” pairing from the Bluetooth deviceand then follow the procedures in “Pairing” to pair with itagain.8 Cannot pair with a device.e Confirm that the Bluetooth device you want to pair withsupports A2DP and AVRCP.e Confirm that the Bluetooth device you want to connect withis able to communicate. For details, refer to the operationmanual of that device.e Turn this unit and the Bluetooth device off once and onagain, and then try pairing them.e Turn off any other Bluetooth devices other than the one thatyou are trying to pair with.e Delete the “CD-200BT” pairing from the Bluetooth deviceand then try pairing again.