IMPORTANT SAFETY PRECAUTIONS TASCAM CD-RW900SL5 − Recording TASCAM CD-RW900SLNOTEIf you set the value so that only high-level signalstrigger recording, remember that the start of a piecemay not be record as in the diagram.Recordsing startsleveltimeThis part of thetrack may not berecordedS_LVLAlso remember that when recording from an analogsource, the threshold should be set so that it is higherthan the“ noise floor”. If the“ noise floor” is higherthan the threshold, a false start will occur:S_LVLleveltimeNoise is higherthan thresholdStart of track is not registeredAutomatic track divisionThe trigger level can also be used to divide tracks if theA_TRACK (auto track) function is enabled.When this function is enabled, the unit automaticallyinserts a track division in the recorded material.To enable or disable automatic track division:1. Use A_TRK option in the REC sub-menu to set themode on. The A.TRACK indicator at the top right ofthe display lights.2. Rotate and push the MULTI JOG dial to select andenter the modes following:DD (digital direct)When recording digitally from MD, CD or DAT, thismode detects a track boundary and divides the track.However, when the DD mode is on, and if the analogsource or non-DAT/CD/MD digital connections aredetected, the track number will be incremented usinglevel detection, as set with the A_TRK LEVEL settingas described here.ªLevelWhen the sound level has dropped below the thresholdfor more than two seconds, and sound has re-started, thetrack will be divided.Use A_TRK LEVEL option in the REC sub-menu. Thetrigger level is set to -24dB to -72 dB.A_LVLAt least2 secondsleveltimeTrack incrementManually divide trackWhile recording is taking place, press the RECORD key.The current track number is incremented by one.For details of automatic track division while recording, see“Automatic track division” on page 26.NOTEAccording to the “Red Book” (the specification foraudio CDs), a track cannot be less than four secondsin length, and there can be a maximum of 99 trackson an audio CD. Bear these limitations in mind whenadding track divisions.This operation can not be applied while recordingtrack 99.