Tascam CD-RW901MKII Owner's Manual

14 TASCAM CD-RW901MKII2 − Features of the CD-RW901MKIIrecording on and off (see “Synchronized recording” onpage 28 for details).t SEARCH keys (∆/˚) Use these keys to move theplayback position inside a track.y SKIP (Â/¯) keys Use these keys to movebetween tracks when playing back (equivalent to rotat-ing the MULTI JOG dial).u STOP key Use this key to stop playback or recording.i OPEN/CLOSE key Opens and close the disc tray.o CLEAR key Clears a mistaken entry made with thenumber keys.In the program mode, pressing this key cancels theprogram entered at the last.It also acts like the ESCAPE key in the Menu mode.p ENTER key Pressing this key is equivalent to pressingthe MULTI JOG dial to confirm an entry.a INC PLAY key Use this key to switch Incrementl play-back on or off.s MENU key and +/– key Pressing the MENU key turnsthe mode on or off. The +/– key is used to select menuoptions and make settings during Menu mode.d PITCH key and +/– key Use this key to switch PitchControl on and off, and set the pitch value.f ERASE key Erases tracks (CD-RW discs only), or awhole disc, or to refresh a “bad” disc, or to unfinalize afinalized disc (see “Erasing” on page 34 for details).g FINALIZE key Finalizes recordable discs. See“Finalizing” on page 33 for details.h REC MUTE key Use this key when recording, to mutethe input signal for about four seconds and then to enterrecord ready mode (see “Rec mute function” on page 30).j INPUT SEL key Use this key to select the differentaudio inputs and the input combinations (see “Inputselection” on page 26 for full details).k CALL key Pressing this key locates a track to the lastpoint where playback was previously started in playbackready mode, and puts the unit into playback ready mode.During recording, pressing this key assigns an indexnumber manually.l PAUSE key Use this key to standby for playbackor recording.; PLAY key Use this key to start playback, or enterrecord mode from record ready mode.