Tascam DA-3000 Release Notes

Also see for DA-3000: Owner's manual Spec sheet

Tascam DA-3000 Release Notes Manual pdf 1 page image

TASCAM DA-3000 1DA-3000 Release NotesD01216500CUpdatesAlways use the most recent firmware for this unit.Please visit the TEAC Global Site (http://teac-global.com/) tocheck for the latest firmware.New functionsV1.10 additions• A new function has been added that allows the searchspeed to be increased from 10x to 100x. When searchingforward or backward (pressing and holding the . or/ button), press and hold the other search (. or/) button to increase the search speed to 100x.• The peak hold indicator can now be set to display for a timeof 1 to 10 seconds (in second increments).• When the current media has only 10 minutes of remainingrecording time, the INFO indicator now lights red as awarning.• A PLAY MODE setting has been added to the PLAYFUNC page of the menu screen.OptionsCONTINUE (default): All playable files in the currentlyselected folder will be played.SINGLE: Only the selected file will be played.• With the addition of the PLAY MODE setting, the repeatplayback function has been changed.OptionsON*OFF (default)*A file or files will be played back repeatedly accordingto the PLAY MODE setting.• Mark information now appears in a pop-up whenever amark is moved to or passed when searching.Maintenance itemsV1.11 fixes• The Analog input and output signal levels could be 0.5dBdifferent from the specified reference level. This has beenfixed.• When the Input monitoring function is on (pressing theRECORD button with no media inserted into the currentlyselected device), changing settings on the REC FILEpage would result in the output becoming silent. This hasbeen fixed, this version now prevents settings on the RECFILE page from being changed in Input Monitor mode.• When pressing the MULTI JOG dial for setting confirmation,the wheel may turn slightly left or right, resulting in anunexpected menu item. The sensitivity to such unwantedmovements has been improved.V1.10 fixes• When using an AES/EBU connection, if the output is DualWire mode, the INFO indicator now lights red in warning asit should.• When the input signal monitoring function is on, operationwill now immediately reflect the FILE and SAMPLEsettings on the REC FILE page as it should.NOTEWhen the input signal monitoring function is off, thesesettings will not be reflected until the RECORD button ispushed.• If a USB flash drive that was not formatted by a DA-3000is inserted into the unit, “Formatting not optimal. Formatcard? OK=ENTER” appeared in a pop-up message. Thismessage has been changed to “Formatting not optimal.”NOTEPlease use media (USB flash drives, SD cards and CF cards)that have been formatted by this or another DA-3000 in thisunit.• A problem that prevented audio files larger than 64 MBfrom being copied between media has been fixed.• When ADDA DIRECT mode is on, pressing the PLAYbutton causes this pop-up message to appear: “Cannotplay while input monitoring.” Now, pressing the PAUSE or.// buttons, trying to add a mark or move to a markposition will also cause this message to appear.• A problem that caused the reference level setting tochange to –16 dB when the unit recovered from an externalsynchronization error has been fixed.• During playback of a DSDIFF or DSF file, direct location witha USB keyboard would not work (specifically, after 12:41when 5.6MHz and 25:21 when 2.8MHz). This has been fixed.• When using a cascade connection, the counters for valuesless than a second shown on the home screens on thesynchronized units differed. This has been fixed.• When using a cascade connection, if the FILE TYPEscreen setting was changed from DSDIFF or DSF toWAV-24 or WAV-16, the slave unit would sometimes failto receive commands from the master unit. This has beenfixed.V1.01 fixes• When a DSF file was in playback standby, moving forwardto a mark position was not possible. This has been fixed.• If a file had a JPEG or another large tag frame*, the tag datacould be broken. This has been fixed.*Used for album cover information, for example• File information on the INFORMATION screen would notbe refreshed. This has been fixed.• When recording (or in recording standby) or monitoringwith DSD, the meters would sometimes flicker. This hasbeen fixed.• A problem with not being able to show LATIN-1 (ISO8859)characters has been fixed.• If there were character fonts not supported for display, thenext character would be shown overlapping the previouscharacter. This has been fixed.• Japanese handakuten would not be shown with half-widthkana. This has been fixed.• Button operation response using the RC-10 has beenimproved.• If the Unlock item on the AUTO MARK screen was set toon, marks would be added even when not unlocked whenrecording DSD digital input. This has been fixed.

/ 2

Related manuals for Tascam DA-3000