Tascam DA-3000 Spec Sheet

Also see for DA-3000: Owner's manual Release notes

Contents

Tascam DA-3000 Spec Sheet Manual pdf 1 page image

DA-3000 Product Spec Sheet-1- TEAC CORPORATIONOct, 2013Product Spec SheetStereo Master Recorder/ADDA ConverterDA-3000■ Main Features●High-Performance Master Recorder>Stereo recording at high sampling frequencies of up to 192kHz PCM and 5.6MHz DSD>Variety of inputs and outputs to handle diverse recording situations>Upgraded user interface>Simultaneous multitrack recording and playback with multiple cascaded units●High-Quality Audio Circuits Enable Use for the DA-3000 as an ADDA Converter>Dual mono circuits eliminate interference between left and right channels>Low noise achieved with fully balanced circuitry and high-quality AD converter>Numerous high-quality parts selected carefully using evaluation tests>Power supply section and high-precision TCXO supports high audio quality>Fanless design eliminates unwanted noise during monitoring and operation※ Don’ t use a wireless remote controller when you use multiple units except using the cascade function.※ Please take 1U or more of blank space above the DA-3000 for ventilation.■ Features at a glance・ Stereo recording to SDHC card or CF card・ PCM recording format: BWF (44.1/48/88.2/96/176.4/192kHz, 16/24bit)・ DSD recording format: DSDIFF/DSF (2.8/5.6MHz)・ SD card slot (supports 4 to 32GB SDHC cards)・ CF card slot (supports UDMA)・ WAV file playback・ Cascade function enables simultaneous operation of multiple units・ Recording 2 mono files from stereo input possible・ Mark functions can be used set up to 99 points per file (mark information can be used in software that supportsBWF format)・ When recording, designation of the recording file folder possible・ Synchronized recording using level, stop time and recording start delay time setting