Tascam DA-98HR Service Manual

Also see for DA-98HR: Setup guide Owner's manual

Tascam DA-98HR Service Manual Manual pdf 43 page image

435-10. Recording/playback RF level check5-10-1. Checks in Normal mode1. After adjusting the recording current following section 5-9,rewind the tape section where format recording was executedin HR mode, and overwrite a signal on that section.2. Rewind the tape section recorded in 1 above and play it.3. In the same was as section 5-7, ensure that the RF level is1200 mV minimum and that the waveform ratio is 80% mini-mum (with both ME and MP tapes).5-10-2. Checks in Confidence modeSet the Confidence mode on, and perform the same check as dis-cussed in 5-10-1.5-11. Recording/playback error rate check5-11-1. Checks in Normal modePlay back the recording you made as per instructions in para-graph 5-10, and check for less than 200 x 10-4 of error rate (withboth ME and MP tapes).5-11-2. Checks in Confidence modeSet the Confidence mode on, and perform the same check as dis-cussed in 5-11-1.